View 74LV4067_673586.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

INTEGRATED CIRCUITS
74LV4067 16-channel analog multiplexer/demultiplexer
Product specification Supersedes data of 1997 Jul 15 IC24 Data Handbook 1998 Jun 23
Philips Semiconductors
Philips Semiconductors
Product specification
16-channel analog multiplexer/demultiplexer
74LV4067
FEATURES
* Optimized for low voltage applications: 1.0 to 6.0 V * Accepts TTL input levels between VCC = 2.7 V and VCC = 3.6 V * Low typ "ON" resistance: * Typical "break before make" built in * Output capability: non-standard * ICC category: MSI
60 W at Vcc - GND = 4.5 V 90 W at Vcc - GND = 3.0 V 145 W at Vcc - GND = 2.0 V
DESCRIPTION
The 74LV4067 is a low-voltage CMOS device and is pin and function compatible with 74HC/HCT4067. The 74LV4067 is an 16-channel analog multiplexer/demultiplexer with four address inputs (So to S3), an active LOW enable input (E), sixteen independent inputs/outputs (Y0 to Y15) and a common input/output (Z). The 74LV4067 contains sixteen bidirectional analog switches, each with one side connected to an independent input/output (Y0 to Y15) and the other side connected to a common input/output (Z). With E LOW, one of the sixteen switches is selected (low impedance ON-state) by S0 to S3. All unselected switches are in the high impedance OFF-state. With E HIGH, all switches are in the high impedance OFF-state, independent of S0 to S3. The analog inputs/outputs (Y0 to Y15, and Z) can swing between Vcc as a positive limit and GND as a negative limit. Vcc - GND may not exceed 6.0 V.
QUICK REFERENCE DATA
GND = 0 V; Tamb = 25C; tr =tf 2.5 ns SYMBOL tPZH/tPZL PARAMETER Turn "ON" time E to VOS Sn to VOS Turn "OFF" time E to VOS Sn to VOS Input capacitance Power dissipation capacitance per switch Maximum switch capacitance independent (Y) common (Z) See Notes 1 and 2 CL = 15 pF RL = 1KW VCC = 3.3 V CONDITIONS TYPICAL 25 27 25 27 3.5 29 5 45 UNIT ns
tPHZ/tPLZ CI CPD CS
ns pF pF pF
NOTE: 1. CPD is used to determine the dynamic power dissipation (PD in W) PD = CPD x VCC2 x fi ) (CL x VCC2 x fo) where: fi = input frequency in MHz; CL = output load capacity in pF; fo = output frequency in MHz; CS = max. switch capacitance in pF; VCC = supply voltage in V; (CL x VCC2 x fo) = sum of the outputs. 2. The condition is VI = GND to VCC.
ORDERING INFORMATION
PACKAGES 24-Pin Plastic DIL 24-Pin Plastic SO 24-Pin Plastic SSOP Type II 24-Pin Plastic TSSOP Type I TEMPERATURE RANGE -40C to +125C -40C to +125C -40C to +125C -40C to +125C OUTSIDE NORTH AMERICA 74LV4067 N 74LV4067 D 74LV4067 DB 74LV4067 PW NORTH AMERICA 74LV4067 N 74LV4067 D 74LV4067 DB 74LV4067PW DH PKG. DWG. # SOT101-1 SOT137-1 SOT340-1 SOT355-1
1998 Jun 23
2
853-1997 19618
Philips Semiconductors
Product specification
16-channel analog multiplexer/demultiplexer
74LV4067
PIN CONFIGURATION
Z1 Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 2 3 4 5 6 7 8 9 24 VCC 23 Y8 22 Y9 21 Y10 20 Y11 19 Y12 18 Y13 17 Y14 16 Y 15 15 E 14 S2 13 S3
PIN DESCRIPTION
PIN NUMBER 1 9, 8, 7, 6, 5, 4, 3, 2, 23, 22, 21, 20, 19, 18, 17, 16 10, 11, 14, 13 12 15 24 Z Y0 to Y15 SYMBOL FUNCTION Common input/output Independent inputs/outputs
S0 to S3 GND E VCC
Select inputs Ground (0 V) Enable input (active LOW) Positive supply voltage
S0 10 S1 11 GND 12
SV01621
LOGIC SYMBOL (IEEE/IEC)
MDX 0 1 0 0 15 3 2 3 16X 4 5 6 7 15 8 G16 9 10 11 1 12 13 14 15 9 8 7 6 5 4 3 2 23 22 21 20 19 18 17 16
LOGIC SYMBOL
Y0 Y1 Y2 Y3 Y4 Y5 Y6 Y7 Y8 Y9 Y10 Y11 Y12 Y13 Y14 Y15 1 9 8 7 6 5 4 3 2 23 22 21 20 19 18 17 16
10 11 14 13
10 11 14 13
S0 S1 S2 S3
15
E
Z
SV01622
SV01624
1998 Jun 23
3
Philips Semiconductors
Product specification
16-channel analog multiplexer/demultiplexer
74LV4067
FUNCTION TABLE
INPUTS E L L L L L L L L L L L L L L L L H S3 L L L L L L L L H H H H H H H H X S2 L L L L H H H H L L L L H H H H X S1 L L H H L L H H L L H H L L H H X S0 L H L H L H L H L H L H L H L H X CHANNEL ON Y0 - Z Y1 - Z Y2 - Z Y3 - Z Y4 - Z Y5 - Z Y6 - Z Y7 - Z Y8 - Z Y9 - Z Y10 - Z Y11 - Z Y12 - Z Y13 - Z Y14 - Z Y15 - Z None
GND 12 15 E 13 S3 14 S2 1-of-16 DECODER 11 S1 10 S0
FUNCTIONAL DIAGRAM
24 V CC Y0 Y1 Y2 Y3 Y4 Y5 Y6 Y7 Y8 Y9 Y 10 Y 11 Y 12 Y 13 Y 14 Y 15 Z 9 8 7 6 5 4 3 2 23 22 21 20 19 18 17 16 1
SV01625
NOTES: H = HIGH voltage level L = LOW voltage level X = don't care
SCHEMATIC DIAGRAM (ONE SWITCH)
Yn
V CC
V CC
Z
GND
SV01626
1998 Jun 23
4
Philips Semiconductors
Product specification
16-channel analog multiplexer/demultiplexer
74LV4067
LOGIC DIAGRAM
Y 0
Y 1
Y 2
Y 3
Y 4 S 0 Y 5
Y 6
Y 7 S 1 Y 8
Y 9
Y 10 S 2
Y 11
Y 12
Y 13 S
3
Y 14
Y 15 E
Z
SV01630
1998 Jun 23
5
Philips Semiconductors
Product specification
16-channel analog multiplexer/demultiplexer
74LV4067
ABSOLUTE MAXIMUM RATINGS1, 2
In accordance with the Absolute Maximum Rating System (IEC 134). Voltages are referenced to GND (ground = 0 V). SYMBOL VCC "IIK "ISK "IS Tstg PTOT PARAMETER DC supply voltage DC input diode current DC switch diode current DC switch current Storage temperature range Power dissipation per package - plastic DIL - plastic mini-pack (SO) - plastic shrink mini-pack (SSOP and TSSOP) for temperature range: -40 to +125C above +70C derate linearly with 12 mW/K above +70C derate linearly with 8 mW/K above +60C derate linearly with 5.5 mW/K VI < -0.5 or VI > VCC + 0.5 V VS < -0.5 or VS > VCC + 0.5 V -0.5 V < VS < VCC + 0.5 V CONDITIONS RATING -0.5 to +7.0 20 20 25 -65 to +150 750 500 400 UNIT V mA mA mA C mW
NOTES: 1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
RECOMMENDED OPERATING CONDITIONS
SYMBOL VCC VI VO Tamb Input voltage Output voltage Operating ambient temperature range in free air See DC and AC characteristics VCC = 1.0 V to 2.0 V VCC = 2.0 V to 2.7 V VCC = 2.7 V to 6.0 V PARAMETER DC supply voltage CONDITIONS See Note 1 and Figure 5 MIN 1.0 0 0 -40 -40 - - - - - - TYP 3.3 - - MAX 6.0 VCC VCC +85 +125 500 200 100 UNIT V V V C
tr, tf
Input rise and fall times
ns/V
NOTE: 1. The LV is guaranteed to function down to VCC = 1.0V (input levels GND or VCC); DC characteristics are guaranteed from VCC = 1.2V to VCC = 6.0V.
1998 Jun 23
6
Philips Semiconductors
Product specification
16-channel analog multiplexer/demultiplexer
74LV4067
DC ELECTRICAL CHARACTERISTICS
Over recommended operating conditions, voltages are referenced to GND (ground = 0 V) LIMITS SYMBOL PARAMETER TEST CONDITIONS MIN VCC = 1.2 V VIH HIGH level Input voltage VCC = 2.0 V VCC = 2.7 to 3.6 V VCC = 4.5 V VCC = 6.0 V VCC = 1.2 V VIL LOW level Input voltage VCC = 2.0 V VCC = 2.7 to 3.6 V VCC = 4.5 V VCC = 6.0 V II IS Input leakage g current Analog switch OFF-state current per channel Analog switch g ON-state current Quiescent supply y current Additional quiescent supply current per input VCC = 3.6 VCC = 6.0 VCC = 3.6 VCC = 6.0 VCC = 3.6 VCC = 6.0 VCC = 3.6 V VCC = 6.0 V VCC = 2.7 to 3.6 V VI = VCC or GND VI = VIH or VIL IVSI = VCC - GND (See Figure 2) VI = VIH or VIL IVSI = VCC - GND (See Figure 3) VI = VCC or GND VIS = GND or VCC; VOS = VCC or GND VI = VCC - 0.6 V VI = VIH or VIL; IS = 100 mA; VIS = VCC to GND 145 VI = VIH or VIL; IL IS = 1000 mA; VIS = VCC t GND to 90 80 60 55 VI = VIH or VIL; IS = 100 mA; VIS = GND VI = VIH or VIL; IL IS = 1000 mA; VIS = GND 225 110 70 60 45 40 235 145 130 100 85 270 165 150 115 100 W 325 200 180 135 125 375 235 210 160 145 W 0.9 1.4 2.0 3.15 4.20 0.3 0.6 0.8 1.35 1.80 1.0 2.0 1.0 2.0 1.0 2.0 20.0 40.0 500 -40C to +85C TYP1 MAX -40C to +125C MIN 0.9 1.4 2.0 3.15 4.20 0.3 0.6 0.8 1.35 1.80 1.0 2.0 1.0 2.0 1.0 2.0 40 80 850 A A A A V V MAX UNIT
A
IS
ICC
ICC
VCC = 1.2 V ON-resistance ( (peak) ) VCC = 2.0 V VCC = 2.7 V VCC = 3.0 to 3.6 V VCC = 4.5 V VCC = 6.0 V VCC = 1.2 V ON-resistance () (rail) VCC = 2.0 V VCC = 2.7 V VCC = 3.0 to 3.6 V VCC = 4.5 V VCC = 6.0 V
RON
RON
NOTES: 1. All typical values are measured at Tamb = 25C. 2. At supply voltages approaching 1.2 V, the analog switch ON-resistance becomes extremely non-linear. Therefore, it is recommended that these devices be used to transmit digital signals only, when using these supply voltages. 3. RON (MAX) data is preliminary.
1998 Jun 23
7
Philips Semiconductors
Product specification
16-channel analog multiplexer/demultiplexer
74LV4067
DC ELECTRICAL CHARACTERISTICS (Continued)
LIMITS SYMBOL PARAMETER TEST CONDITIONS MIN VCC = 1.2 V RON ON resistance ON-resistance () (rail) VCC = 2.0 V VCC = 2.7 V VCC = 3.0 to 3.6 V VCC = 4.5 V VCC = 6.0 V VCC = 1.2 V VCC = 2.0 V VCC = 2.7 V VCC = 3.0 to 3.6 V VCC = 4.5 V VCC = 6.0 V VI = VIH or VIL; IS = 100 mA; VIS = VCC VI = VIH or VIL; IS = 1000 mA; VIS = VCC -40C to +85C TYP1 250 120 75 70 50 45 5 4 4 3 2 320 195 175 130 120 370 225 205 150 135 MAX -40C to +125C MIN MAX W UNIT
W
DRON
Maximum variation of ON-resistance between any two b channels
VI = VIH or VIL; IL VIS = VCC to GND
W
NOTES: 1. All typical values are measured at Tamb = 25C. 2. At supply voltages approaching 1.2 V, the analog switch ON-resistance becomes extremely non-linear. Therefore, it is recommended that these devices be used to transmit digital signals only, when using these supply voltages. 3. RON (MAX) data is preliminary.
1998 Jun 23
8
Philips Semiconductors
Product specification
16-channel analog multiplexer/demultiplexer
74LV4067
HIGH (from enable inputs) V
LOW (from enable inputs)
Yn Y n Z A V is = 0 to V
CC
Z
A
- GND
I
is V I = VCC or GND V O = GND or V CC GND
GND
SV01623
Figure 1. Test circuit for measuring ON-resistance (RON).
SV01628
Figure 2. Test circuit for measuring OFF-state current.
HIGH (from enable inputs) R ON 150 (W) 120 Yn VCC = 3.0 V Z A A VO 60 30 VI = VCC or GND GND 0 0 1.2 2.4 V is (V) 3.6 4.8 VCC = 4.5 V 90 (open circuit) V CC = 2.0 V
SV01629
SV01627
Figure 3. Test circuit for measuring ON-state current.
Figure 4. Typical ON-resistance (Ron) as a function of input voltage (Vis for Vis = 0 to VCC - GND.
V
- GND CC (V)
6.0
4.0
operating area
2.0
0
2.0
4.0
6.0 V CC - GND
(V)
SV01631
Figure 5. Guaranteed operating area as a function of the supply voltages.
1998 Jun 23
9
Philips Semiconductors
Product specification
16-channel analog multiplexer/demultiplexer
74LV4067
AC CHARACTERISTICS
GND = 0 V; tr = tf 2.5ns; CL = 50pF CONDITION SYMBOL PARAMETER VCC (V) 1.2 2.0 tPHL/tPLH Propagation delay Viis to Vos Z to Yn 2.7 3.0 to 3.6 4.5 6.0 1.2 2.0 tPHL/tPLH Propagation delay Viis to Vos Yn to Z 2.7 3.0 to 3.6 4.5 6.0 1.2 2.0 tPZH/tPZL Turn-on time E to Yn 2.7 3.0 to 3.6 4.5 6.0 1.2 2.0 tPZH/tPZL Turn-on time Z to Yn 2.7 3.0 to 3.6 4.5 6.0 1.2 2.0 tPHZ/tPLZ Turn-off time E to Yn 2.7 3.0 to 3.6 4.5 6.0 1.2 2.0 tPHZ/tPLZ Turn-off time Sn to Yn 2.7 3.0 to 3.6 4.5 6.0 NOTES: 1. Unless otherwise stated, all typical values are measured at Tamb = 25C 2. Typical values are measured at VCC = 3.3 V. RL = 1kW CL = 50 pF Figures 14 and 15 RL = 1kW CL = 50 pF Figures 14 and 15 RL = 1kW CL = 50 pF Figures 14 and 15 RL = 1kW CL = 50 pF Figures 14 and 15 RL = ; ; CL = 50 pF Figure 13 RL = ; CL = 50 pF Figure 13 OTHER MIN LIMITS -40 to +85 C TYP1 30 10 8 62 5 4 45 15 11 92 8 6 145 49 36 282 25 19 160 54 40 302 27 21 125 43 33 262 23 18 140 49 37 292 26 20 90 67 54 46 36 109 81 65 56 43 ns 80 59 48 41 32 95 71 57 49 38 ns 102 75 60 51 39 122 94 72 61 47 ns 94 69 55 47 38 112 86 66 56 43 ns 31 23 18 15 12 36 26 21 18 14 ns 19 14 11 9 7 24 18 14 12 9 ns MAX -40 to +125 C MIN MAX UNIT
1998 Jun 23
10
Philips Semiconductors
Product specification
16-channel analog multiplexer/demultiplexer
74LV4067
AC CHARACTERISTICS (Continued)
GND = 0 V; tr = tf 2.5ns; CL = 50pF SYMBOL PARAMETER CONDITION VCC (V) 1.2 2.0 tPZH/tPZL Turn-on time E to Z 2.7 3.0 to 3.6 4.5 6.0 1.2 2.0 tPZH/tPZL Turn-on time Sn to Yn 2.7 3.0 to 3.6 4.5 6.0 1.2 2.0 tPHZ/tPLZ Turn-off time E to Z 2.7 3.0 to 3.6 4.5 6.0 1.2 2.0 tPHZ/tPLZ Turn-off time Sn to Yn 2.7 3.0 to 3.6 4.5 6.0 NOTES: 1. Unless otherwise stated, all typical values are measured at Tamb = 25C 2. Typical values are measured at VCC = 3.3 V. RL = 1kW CL = 50 pF Figures 14 and 15 RL = 1kW CL = 50 pF Figures 14 and 15 RL = 1kW CL = 50 pF Figures 14 and 15 RL = 1kW CL = 50 pF Figures 14 and 15 OTHER MIN -40 to +85 C TYP1 145 51 39 292 26 20 170 58 42 322 29 21 145 51 38 302 29 21 160 56 42 322 29 23 104 77 62 53 41 124 92 74 61 49 ns 93 69 56 48 37 110 82 66 56 44 ns 109 80 64 54 42 131 96 77 65 50 ns 93 70 56 48 36 110 83 66 56 43 ns MAX -40 to +125 C MIN MAX UNIT
1998 Jun 23
11
Philips Semiconductors
Product specification
16-channel analog multiplexer/demultiplexer
74LV4067
ADDITIONAL AC CHARACTERISTICS
Recommended conditions and typical values GND = 0 V; tr = tf 2.5ns SYMBOL PARAMETER Sine-wave distortion f = 1 kHz Sine-wave distortion f = 10 kHz Switch "OFF" signal feed through Crosstalk between any two switches/multiplexers V(p-p) Crosstalk voltage between enable or address input to any switch (peak-to-peak value) Minimum frequency response (-3 dB) Maximum switch capacitance TYP. 0.80 0.40 2.40 1.20 -50 -50 -60 -60 110 120 180 200 5 UNIT % % dB dB mV VCC (V) 3.0 6.0 3.0 6.0 3.0 6.0 3.0 6.0 3.0 6.0 3.0 6.0 Note 2 Vis(p-p) (V) 2.75 5.50 2.75 5.50 Note 1 Note 1 CONDITIONS RL = 10 kW; CL = 50 pf Figures 10 and 11 RL = 10 kW; CL = 50 pf Figures 10 and 11 RL = 600 W; CL = 50 pf; f= 1 MHz Figures 6 and 12 RL = 600 W; CL = 50 pf; f= 1 MHz Figure 8 RL = 600 W; CL = 50 pf; f= 1 MHz (Sn or E, square wave between VCC and GND tr = tf = 6 ns) Figure 9 RL = 50 W; CL = 50 pF Figures 7 and 10
fmax CS
MHz pf
GENERAL NOTES: Vis is the input voltage at nY or Z terminal, whichever is assigned as an input. VOS is the output voltage at nY or Z terminal, whichever is assigned as an output. NOTES: 1. Adjust input voltage Vis is 0 dBm level (0 dBm = 1 mW into 600 W). 2. Adjust input voltage Vis is 0 dBm level at VOS for 1 MHz (0 dBm = 1 mW into 50 W).
0 (dB) 5 (dB)
-50
0
-100 10 10 2 10 3 10 4 f (kHz) 10 5 10 6
-5 10 10 2 10 3 10 4 f (kHz) 10 5 10 6
SV01635
SV01636
Figure 6. Typical switch "OFF" signal feed-through as a function of frequency. NOTES TO FIGURES 6 AND 7: Test conditions: VCC = 3.0 V; GND = 0 V; RL = 50 W; RSOURCE = 1kW.
VCC
Figure 7. Typical frequency response.
VCC
VCC
0.1 mF V is
RL
2RL Yn/Z Z/Yn Yn/Z
2RL
2RL Z/Yn Vos
channel ON
2RL
CL GND
RL
channel OFF
2RL
CL
dB
GND (b)
(a)
SV01632
Figure 8. Test circuit for measuring crosstalk between any two switches. (a) channel ON condition; (b) channel OFF condition.
1998 Jun 23
12
Philips Semiconductors
Product specification
16-channel analog multiplexer/demultiplexer
74LV4067
NOTE TO FIGURE 9: The crosstalk is defined as follows (oscilloscope output):
2RL V(p - p) Yn/Z
VCC
Sn or E
VCC
2RL DUT Z/Yn
2RL
2RL
CL
oscilloscope
SV01642
GND
SV01633
Figure 9. Test circuit for measuring crosstalk between control and any switch. NOTE TO FIGURE 10: Adjust input voltage to obtain 0 dBm at VOS when Fin = 1 MHz. After set-up frequency of fin is increased to obtain a reading of -3 dB at VOS.
2RL Z/Yn Vos 2RL CL dB GND
VCC
sine-wave
0.1 mF Yn/Z
channel ON
SV01634
Figure 10. Test circuit for measuring minimum frequency response.
VCC
VCC 2RL
fin = 1 kHz sine-wave
10 mF Yn/Z
Z/Yn Vos V is
0.1 mF
2RL Yn/Z Z/Yn VOS
channel ON
2RL
CL
distortion meter GND
channel OFF
2RL
CL
dB
SV01637
GND
Figure 11. Test circuit for measuring sine-wave distortion.
SV01639
Figure 12. Test circuit for measuring switch "OFF" signal feed-through.
1998 Jun 23
13
Philips Semiconductors
Product specification
16-channel analog multiplexer/demultiplexer
74LV4067
WAVEFORMS
VM = 1.5 V at 2.7 V VCC 3.6 V VM = 0.5 x VCC at 2.7 V > VCC > 3.6 V VOL and VOH are the typical output voltage drop that occur with the output load Vx = VOL + 0.3 V at 2.7 V VCC 3.6 V VX = VOL + 0.1 x VCC at 2.7 V >VCC > 3.6 V VY = VOH - 0.3 V at 2.7 V VCC 3.6 V VY = VOH - 0.1 x VCC at 2.7 V >VCC > 3.6 V
VI INPUTS GND t PLH V OH OUTPUTS V OL VM t PHL tPLZ VCC OUTPUT LOW-to-OFF OFF-to-LOW VOL tPHZ tPZL VM VX tPZH VM VI INPUTS GND VM
SV01638
VOH OUTPUT HIGH-to-OFF OFF-to-HIGH GND outputs enabled
VY VM outputs disabled outputs enabled
Figure 13. Input (Vis) to output (Vos) propagation delays.
SV01640
Figure 14. Turn-on and turn-off times for the inputs (Sn, E) to the output (Vos).
TEST CIRCUIT
tW 90% VM 10% tTHL (tf) tTLH (tr) CL 50 pF 1kW POSITIVE PULSE 10% 90% VM tW 90% VM 10% 0V 10% 0V tTLH (tr) tTHL (tf) VI VM VI
Vcc
S1
90% 2 VCC Open GND NEGATIVE PULSE
Vl PULSE GENERATOR RT D.U.T.
VO
1kW
Test Circuit for Outputs
DEFINITIONS
CL = Load capacitance includes jig and probe capacitance RL = load resistor VCC < 2.7V 2.7 - 3.6V > 3.6 V VI VCC 2.7V VCC Test tPLH/tPHL tPLZ/tPZL tPHZ/tPZH S1 Open 2 VCC GND VIS Pulse GND VI RT = Termination resistance should be equal to ZOUT of pulse generators. tr = tf =6ns, when measuring fmax, there is no constraint on tr, tf with 50% duty factor.
SY01740
Figure 15. Load circuitry for switching times.
1998 Jun 23
14
Philips Semiconductors
Product specification
16-channel analog multiplexer/demultiplexer
74LV4067
DIP24: plastic dual in-line package; 24 leads (600 mil)
SOT101-1
1998 Jun 23
15
Philips Semiconductors
Product specification
16-channel analog multiplexer/demultiplexer
74LV4067
SO24: plastic small outline package; 24 leads; body width 7.5 mm
SOT137-1
1998 Jun 23
16
Philips Semiconductors
Product specification
16-channel analog multiplexer/demultiplexer
74LV4067
SSOP24: plastic shrink small outline package; 24 leads; body width 5.3 mm
SOT340-1
1998 Jun 23
17
Philips Semiconductors
Product specification
16-channel analog multiplexer/demultiplexer
74LV4067
TSSOP24: plastic thin shrink small outline package; 24 leads; body width 4.4 mm
SOT355-1
1998 Jun 23
18
Philips Semiconductors
Product specification
16-channel analog multiplexer/demultiplexer
74LV4067
NOTES
1998 Jun 23
19
Philips Semiconductors
Product specification
16-channel analog multiplexer/demultiplexer
74LV4067
DEFINITIONS
Data Sheet Identification
Objective Specification
Product Status
Formative or in Design
Definition
This data sheet contains the design target or goal specifications for product development. Specifications may change in any manner without notice. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. This data sheet contains Final Specifications. Philips Semiconductors reserves the right to make changes at any time without notice, in order to improve design and supply the best possible product.
Preliminary Specification
Preproduction Product
Product Specification
Full Production
Philips Semiconductors and Philips Electronics North America Corporation reserve the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. LIFE SUPPORT APPLICATIONS Philips Semiconductors and Philips Electronics North America Corporation Products are not designed for use in life support appliances, devices, or systems where malfunction of a Philips Semiconductors and Philips Electronics North America Corporation Product can reasonably be expected to result in a personal injury. Philips Semiconductors and Philips Electronics North America Corporation customers using or selling Philips Semiconductors and Philips Electronics North America Corporation Products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors and Philips Electronics North America Corporation for any damages resulting from such improper use or sale. Philips Semiconductors 811 East Arques Avenue P.O. Box 3409 Sunnyvale, California 94088-3409 Telephone 800-234-7381 (c) Copyright Philips Electronics North America Corporation 1998 All rights reserved. Printed in U.S.A. print code Document order number: Date of release: 05-96 9397-750-04661
Philips Semiconductors
yyyy mmm dd 20

▲Up To Search▲

Price & Availability of 74LV4067

	To Download 74LV4067 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .